Compatible Systems RISC 2800i Manuale Utente Pagina 46

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 56
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 45
MPC7447A RISC Microprocessor Hardware Specifications, Rev. 5
46 Freescale Semiconductor
System Design Information
the selection of any thermal interface material depends on many factors—thermal performance
requirements, manufacturability, service temperature, dielectric properties, cost, and so on.
Figure 23. Thermal Performance of Select Thermal Interface Material
The board designer can choose between several types of thermal interface. Heat sink adhesive materials
should be selected based on high conductivity and mechanical strength to meet equipment shock/vibration
requirements. There are several commercially available thermal interfaces and adhesive materials
provided by the following vendors:
The Bergquist Company 800-347-4572
18930 West 78
th
St.
Chanhassen, MN 55317
Internet: www.bergquistcompany.com
Chomerics, Inc. 781-935-4850
77 Dragon Ct.
Woburn, MA 01801
Internet: www.chomerics.com
Dow-Corning Corporation 800-248-2481
Dow-Corning Electronic Materials
2200 W. Salzburg Rd.
Midland, MI 48686-0997
Internet: www.dowcorning.com
0
0.5
1
1.5
2
0 1020304050607080
Silicone Sheet (0.006 in.)
Bare Joint
Fluoroether Oil Sheet (0.007 in.)
Graphite/Oil Sheet (0.005 in.)
Synthetic Grease
Contact Pressure (psi)
Specific Thermal Resistance (K-in.
2
/W)
Vedere la pagina 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 55 56

Commenti su questo manuale

Nessun commento