Compatible-systems MicroRouter 1200i Manuale Utente Scaricare il pdf (Pagina 30)

24 Chapter 6 - Basic Configuration Guide

IPX Protocol

Required for IPX

WAN interfaces which are set for PPP operation do not generally use an

IPX address. They are set to act as an “unnumbered interface.” In this

mode of operation, there are no required settings.

Suggested for IPX

If you plan to use dial-on-demand for this link, you should set the

update method to “triggered” to avoid the link being brought up by

transmission of IPX RIP information. You should only use triggered

operation when you are connecting to another Compatible Systems

router at the other end.

When you set up an on-demand link with IPX, you should carefully

monitor link usage to determine whether the link is being activated only

when it is needed. Additional router configuration will be required for

many networks in order to achieve optimal link usage.

• Set update method

CV: Use the IPX Routing: WAN Dialog Box.

TB: Use configure and set the Updates keyword in the IPX WAN 0

(and/or WAN 1) section.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 44 45

Nessun commento

Compatible-systems MicroRouter 1200i Manuale Utente Pagina 30